Toshiba RAS-M18EACV-E, RAS-M13EKCVP-E Louver position in heating operation, Auto COOL/Dry

Item	Operation flow and applicable data, etc.	Description
9. Louver control	This function controls the air direction of the indoor unit.
1) Louver	• The position is automatically controlled according to the operation
position	mode (COOL/HEAT).

•The set louver position is stored in memory by the microcomputer, and the louver returns to the stored position when the next opera- tion is performed. (Cooling/heating memory position)

The angle of the louver is indicated as the horizontal angle is 0°.

When the louver closes fully, it directs approx. 49° upward.

1) Louver position in cooling operation

	Horizontal	Cooling/AUTO
Louver	(0˚)	(COOL)/DRY
		operation
angle

	Hi Power		Cooling	NO	Powerful
Cooling operation/			memory		operation
			position
	Room temp. (Ta) <	Room temp. (Ta) ≥				YES
AUTO (COOL)/Dry
	Set temp. (Tsc) + 3.5	Set temp. (Tsc) + 3.5
				YES	Room temp. ≥
					Set temp. +3.5
						NO
			Inclined		Cooling
					memory
			blowing
Initial setting of	Initial setting of	“Inclined blowing”			position
“Cooling storage position”	“Cooling storage position”	Louver :
Louver :	Louver :	Directs downward (14˚)	YES	Room temp. ≥		NO
Directs downward (9˚)	Directs downward (9˚)
				Set temp. +3.5

2) Louver position in heating operation
						Heating
	ECO operation
						operation
Heating operation/	Room temp. (Ta) <	Room temp. (Ta) ≥
			Heating
AUTO (HEAT)	Set temp. (Tsc) – 3 or	Set temp. (Tsc) – 3			NO	ECO
	25 minutes after start		memory
						operation
	of operation		position
							YES
				YES Room temp. ≥
						Set temp. –3.0

NO

			Heating		Horizontal
			memory
					position
Initial setting of	“Heating storage position”	“Cooling storage position”	position
“Heating storage position”	Louver :	Louver :
Louver :	Directs downward (76˚)	Directs downward (9˚)	YES	Room temp. ≥		NO
Directs downward (76˚)
				Set temp. –3.0

2) Air direction	Air direction	• The louver position can
adjustment		be arbitrarily set up by
		pushing [FIX] button.

Horizontal	Inclined	Blowing	Inclined	Horizontal
blowing	blowing	downward	blowing	blowing

3) Swing	• Swing operation is performed in width 35° with the stop position as	• Swing
	the center.	When pushing [SWING]
	• If the stop position exceeds either upper or lower limit position,	button during operation,
		the louver starts swing-
	swing operation is performed in width 35° from the limit which the
		ing.
	stop position exceeded.

– 46 –