Toshiba RAS-M10EKCVP-E, RAS-M13EKCVP-E 112, Part name, Procedures, Detachment, Attachment

No.	Part name	Procedures	Remarks
"	Front cabinet 1.	Detachment
	1)	Perform step 1 in 1.
	2)	Remove the fixing screws (ST1TØ4 x 8 l	2 pcs.)
		used to secure the front cabinet and inverter
		cover, the screws (ST1TØ4 x 8 l 3 pcs.) used to
		secure the front cabinet at the bottom plate, and
		the fixing screws (ST1TØ4 x 8l 2 pcs.) used to
		secure the motor base.

• The front cabinet is fitted into the side cabinet (left) at the front left side so pull up the top of the front cabinet to remove it.

Front cabinet

2. Attachment

1)Insert the claw on the front left side into the side cabinet (left).

2)Hook the bottom part of the front right side onto

the concave section of the bottom plate. Insert the claw of the side cabinet (right) into the square hole in the front cabinet.

3) Return the screws that were removed above to
their original positions, and attach them.	Claw
	Square hole

Concave section

– 112 –