Toshiba RAS-M18EACV-E, RAS-M13EKCVP-E, RAS-M14EACV-E How to Set the Auto Restart Function, 55

9-3. Auto Restart Function

This indoor unit is equipped with an automatic restarting function which allows the unit to restart operating with the set operating conditions in the event of a power supply being accidentally shut down. The operation will resume without warning three minutes after power is restored.

This function is not set to work when shipped from the factory. Therefore it is necessary to set it to work.

• When the unit is standby (Not operating)

9-3-1. How to Set the Auto Restart Function

To set the auto restart function, proceed as follows:

The power supply to the unit must be on ; the function will not set if the power is off.

Push the [RESET] button located in the center of the front panel continuously for three seconds.

The unit receives the signal and beeps three times.

The unit then restarts operating automatically in the event of power supply being accidentally shut down.

Operation		Motions
Push [RESET] button for more than	The unit is on standby.
three seconds. (Less than	↓
10 seconds)
	The unit starts to operate.	The green indicator is on.
	↓ After approx. three seconds,
	The unit beeps three times	The green indicator flashes
	and continues to operate.	for 5 seconds
RESET button	If the unit is not required to operate at this time, push [RESET] button
	once more or use the remote controller to turn it off.
• When the unit is in operation
Operation		Motions
Push [RESET] button for more than	The unit is in operation.	The green indicator is on.
three seconds. (Less than	↓
10 seconds)
	The unit stops operating.	The green indicator is turned off.
	↓ After approx. three seconds,
	The unit beeps three times.	The green indicator flashes
		for 5 seconds
	If the unit is required to operate at this time, push [RESET] button
RESET button	once more or use the remote controller to turn it on.

•When the unit is turned on by this function, the louver will not swing even though it was swinging automatically before shutting down.

•While the filter check indicator is on, the RESET button has the function of filter reset button.

– 55 –