JVC HR-XV32E 22 EN, Recording Features, Elapsed Recording Time Indication, Tape Remaining Time

Filename [XV3EX_07S-VHS.fm]
XV3EX_01.book Page 22 Friday, August 22, 2003 12:21 PM	Masterpage:Left+

22 EN	OPERATIONS ON VHS DECK (cont.)
Recording Features	3 Set the recording duration.
	If you want to record for more than 30 minutes, press 7
	to extend the time. Each press extends recording time by
	30 minutes.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

Record One Programme While Watching Another

If your unit is connected to the TV via the AV connection, press TV/VCR. The unit’s VCR indicator and the TV broadcast being recorded disappear. Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

●The programme selected with the TV’s channel controls appears on the TV screen, while the one selected with the unit’s PR buttons is recorded on the tape.

●If a decoder is connected to the unit ( pg. 61), you can select a scrambled channel as well with the TV channel controls.

NOTES:

●You can only perform ITR using the 7 button on the unit’s front panel.

●Still picture playback stops automatically after 5 minutes to protect the heads.

●When the end of the tape is reached during timer recording, the unit stops and “” and “$” blink on the front display panel.

●When the end of the tape is reached during timer recording or Instant Timer Recording, the unit is turned off and “” and “$” blink on the front display panel.

●During Instant Timer Recording, any other timer programmed recording won’t start even if their start time has come. In such a case, the timer programmed recording starts (if the end time of the timer programmed recording is set after the end of Instant Timer Recording) after the Instant Timer Recording finishes.

Elapsed Recording Time Indication

1Set the counter display.

Press – –:– – until a counter reading appears on the front display panel.

2Reset the counter.

Press 0000 before starting recording or playback.

●The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback.

Tape Remaining Time

Press – –:– – until the time remaining on the tape appears.

●The front display panel shows the tape remaining time with “z” displayed.

NOTE:

You can also use the DVD deck in the following cases. Before use, be sure to turn on the unit and select the DVD deck.

●During recording

●During timer recording

●During timer standby mode

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the unit off after recording is finished.

1Start recording.

Press 7 on the unit.

2Engage the ITR mode.

Press 7 again. “” blinks and “0:30” appears on the front display panel.

●By pressing the – –:– – button, you can change the display to show the clock time, counter reading or tape remaining time.

NOTES:

●When you press – –:––, the on-screen display appears on the TV screen for 5 seconds, then the displays other than the counter disappears. To clear the counter display, press – –:––.

●Depending on the type of tape being used, the tape remaining time reading may not appear right away, or is not correct.

“– –:– –” may sometimes appear, or the display may blink on occasion.

Page 22

August 22, 2003 12:20 pm