JVC HR-XV32E manual 54 EN

Filename [XV3EX_09Editing.fm]
XV3EX_01.book Page 54 Friday, August 22, 2003 12:21 PM	Masterpage:Left0

54 EN		EDITING (VHS DECK)
Edit From A Camcorder	A
		Make connections.

You can use a camcorder as the source player and your unit as the recording deck.

Slide the TV/VCR/DVD switch to the right.

Recorder

	To PAUSE
AUDIO input	connector
Audio cable (not provided)
	Mini-plug cable
Video cable (not provided)	(not provided)
	(JVC camcorder
VIDEO input	only)
VIDEO OUT

Connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the unit’s front panel AUDIO and VIDEO input connectors.

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your unit.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the unit. Refer to the camcorder’s instruction manual for operating procedure.

B Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

C Set the unit’s input mode.

Press AUX (number key “0”) and/or PR to select “F-1”.

AUDIO OUT

Player EDIT

D Set the edit mode.

See “PICTURE CONTROL” on page 63.

E Engage the Record Pause mode.

Use 4, 3, or 5 to locate the point where you start recording, then press and hold 9 and press 7 to engage the Record Pause mode.

F Start the camcorder.

Engage the Play mode of the camcorder.

G Start the unit.

Press 4 to engage the Record mode of the unit.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step D, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

Page 54

August 22, 2003 12:20 pm