JVC HR-XV32E manual 60 EN, Receiver, Perfect Connections

Filename [XV3EX_09Editing.fm]
XV3EX_01.book Page 60 Friday, August 22, 2003 12:21 PM	Masterpage:Left0

60 EN			SYSTEM CONNECTIONS
Connecting To A Satellite		Perfect Connections
		This is an example of recommended connections if your
Receiver
		Connect the decoder to the satellite receiver’s connector
		TV has two 21-pin AV input (SCART) connectors.
Simple Connections		if you have a decoder, L-1 IN/OUT connector to TV’s
		connector, and L-2 IN/DECODER connector to the
This is an example of a simple connection if your TV has		satellite receiver’s connector. Then connect the satellite
		receiver and TV.
one 21-pin AV input (SCART) connector.		Outdoor unit	Aerial
Connect the satellite receiver to the L-2 IN/DECODER
connector, then connect the L-1 IN/OUT connector to		Satellite cable
the TV’s connector.			TV aerial cable
Outdoor unit	Aerial
	TV aerial cable	Satellite receiver
Satellite cable			ANTENNA IN
Satellite receiver			ANTENNA OUT
	ANTENNA IN
	ANTENNA OUT

Decoder

TV TV

IMPORTANT

When you set “L-2 SELECT” to “SAT” ( pg. 64), it is possible to view a satellite broadcast with the TV set to its AV mode even if the unit is turned off. When the unit is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR indicator on the front display panel.

●If you turn on the unit when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the unit to the video mode.

NOTES:

●Set “L-2 SELECT” to “A/V”. ( pg. 64)

●You can use the Automatic Satellite Programme Recording function ( pg. 28) with this connection. (VHS deck only)

●To record a programme via the satellite receiver, select L-2 mode by pressing AUX (number key “0”) and/or PR so that “L-2” appears on the front display panel. (VHS deck only)

●To receive a scrambled broadcast, descramble the signal with the decoder connected to the satellite receiver.

●For details, refer to the instruction manual of the satellite receiver and decoder.

NOTES:

●Set “L-2 SELECT” to “A/V”. ( pg. 64)

●You can use the Automatic Satellite Programme Recording function ( pg. 28) with this connection. (VHS deck only)

●To record a programme via the satellite receiver, select L-2 mode by pressing AUX (number key “0”) and/or PR so that “L-2” appears on the front display panel. (VHS deck only)

●For details, refer to the instruction manual of the satellite receiver.

Page 60

August 22, 2003 12:20 pm