JVC HR-XV32E manual 26 EN, Express Timer

Filename [XV3EX_07S-VHS.fm]
XV3EX_01.book Page 26 Friday, August 22, 2003 12:21 PM	Masterpage:Left+

26 EN	OPERATIONS ON VHS DECK (cont.)
Express Timer	D Enter the programme start time.
Programming	Press START +/– to enter the
	time you want recording to
	start.

If you do not know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your unit to timer-record the programme.

Before performing Express Timer Programming:

●Make sure that the unit’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The unit will come on automatically.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

●Press and hold START +/– to

move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

E Enter the programme stop time.

Press STOP +/– to enter the time you want recording to stop.

● Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

F Enter the programme date.

Press DATE +/–.

● The current date appears on the TV screen. The date you enter appears in its place.

G Enter the channel position.

Press PR +/–.

Example: To timer-record the programme from 21:00 to	H Set the tape speed.
22:00 on 25th December, on channel 1.	Press p.

A Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

B Access the SHOWVIEW screen.

Press PROG.

C Access the Programme screen.

Press START +/–. (If you’re just starting out, “P1” appears.)

I Set the VPS/PDC mode.

Press VPS/PDC (number key “7”) to select “ON” or “OFF”.

●If “VPS/PDC ON” is displayed on the TV screen, “VPS/PDC” is set to “ON”.

●If “VPS/PDC OFF” is displayed on the TV screen, “VPS/PDC”

is set to “OFF”.

 “VPS/PDC Recording” on page 25.

J Return to the normal screen.

Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

●Repeat steps B – J for each additional programme.

K Engage the unit’s timer mode.

Press #. The unit turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # again.

Page 26

August 22, 2003 12:20 pm