JVC HR-XV32E manual 56 EN, Dubbing, From DVD to VHS

Filename [XV3EX_09Editing.fm]
XV3EX_01.book Page 56 Friday, August 22, 2003 12:21 PM	Masterpage:Left+

56 EN		EDITING (VHS DECK) (cont.)
Dubbing	C
		Prepare the DVD deck for dubbing.
(from DVD to VHS)	A Press DVD.
	B Start playback and search for the point where you
You can dub selected scenes from the DVD disc to a cassette,	want to start dubbing by pressing 4, 5 or 3.
starting and stopping wherever you wish.
	D Start dubbing.
However, it is not possible to dub copy-protected discs.
In such case, “ERROR” appears on the front display panel.
	A little before the dubbing start point, press and hold 7,
● Turn on the TV and select the video channel (or AV
	then press 4 on the remote control.
mode).	● “DUB” lights on the front display panel.

●Slide the TV/VCR/DVD switch to the right.

E End dubbing.

Press 8.

● Be sure to press 8 while the VCR indicator lights up on the unit.

● If you press 8 or x with the DVD deck selected, the dubbing stopped, but the opening screen is also recorded.

● When you have finished dubbing, press DVD to select the DVD deck and press 8 to stop playback.

NOTES:

● Set “ON SCREEN GUIDE” to “OFF” ( pg. 67) if you do not want to record the on-screen display for DVD discs during dubbing.

● There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

● The superimposed indication during the operation or dubbing is not recorded.

● Set “PICTURE CONTROL” to “EDIT”. ( pg. 63)

A Load a cassette and place a disc.

For the VHS deck

Insert a cassette with the record safety tab intact.

For the DVD deck

APress x on the DVD deck to open the disc tray. B Place the disc in the disc tray.

C Press x on the DVD deck to close the disc tray.

B Prepare the VHS deck for dubbing.

APress VCR.

BPress p to select recording speed.

CSearch for the point where you want to start dubbing by pressing 4, 5 or 3 then press 8.

Page 56

August 22, 2003 12:20 pm