JVC HR-XV32E manual 20 EN, Manual Tracking, Instant ReView, Repeat Playback, Soundtrack Selection

Filename [XV3EX_07S-VHS.fm]

XV3EX_01.book Page 20 Friday, August 22, 2003 12:21 PMMasterpage:Left+

20 EN OPERATIONS ON VHS DECK (cont.)

Manual Tracking

Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR buttons.

1 Override automatic tracking.

During playback, press p on the remote control.

2 Adjust the tracking manually.

Press PR + or – on the remote control.

● Press p again to return to automatic tracking.

NOTE:

When a new tape is inserted, the unit enters the automatic tracking mode automatically.

Instant ReView

Simply by pressing a single button, the unit power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the unit is off and that the Timer mode is disengaged.

Activate Instant ReView.

Press . The unit power comes on and the unit searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

●To watch the first of the 3 programmes, press three times. The unit searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

Repeat Playback

Your unit can automatically play back the whole tape 100 times repeatedly.

1Start playback.

Press 4.

Soundtrack Selection

Your unit is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing A.MONITOR changes the soundtrack as follows:

TRACK	USE
On-Screen Display
HI FI	For Hi-Fi stereo tapes
L j h R
HI FI	For main audio of Bilingual tapes
L j
HI FI	For sub audio of Bilingual tapes
h R
NORM	For audio-dubbed tapes
HI FI	For audio-dubbed tapes
NORM

NOTES:

●“HIFI L j h R” should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

●For instructions on recording stereo and bilingual programmes, refer to page 23.

●“O.S.D.” must be set to “ON” or the on-screen displays will not appear. ( pg. 63)

2Activate Repeat Playback.

Press 4 and hold for over 5 seconds, then release.

●The Play indicator ($) on the front display panel blinks slowly.

●After playing back a tape 100 times, the unit stops automatically.

3Stop Repeat Playback.

Press 8 at any time.

●Pressing 4, 3, 5 or 9 also stops Repeat Playback.

Page 20

August 22, 2003 12:20 pm