Masterpage:Right-No-Heading

EN 13

Filename [XV3EX_06Index.fm]
Page 13 August 22, 2003 12:20 pm
Results of Auto Set Up/Preset Download appear on the front display panel

If both Auto Channel Set and Auto

Clock Set have been performed

successfully, the correct current time

is displayed.

Turn on the TV and select its video channel or AV mode, then
make sure that all necessary stations have been stored in the
unit’s memory by using the PR button(s).
●If station names (ID – 墌pg. 72) have also been stored in the
unit’s memory, the station name will be displayed at the top
left corner of the TV screen for about 5 seconds when the unit
is tuned to a different station.
●If you want to set the tuner manually such as to add or skip
channels, to change channel positions, or to set or change
station names, see pages 69 – 72.

If Auto Channel Set has succeeded

but Auto Clock Set has not, “CH 1”

(channel position) is displayed.

ATurn on the TV and select its video channel or AV mode, then
make sure that all necessary stations have been stored in the
unit’s memory by using the PR button(s).
●If station names (ID – 墌pg. 72) have also been stored in the
unit’s memory, the station name will be displayed at the top
left corner of the TV screen for about 5 seconds when the unit
is tuned to a different station.
●If you want to set the tuner manually such as to add or skip
channels, to change channel positions, or to set or change
station names, see pages 69 – 72.
BPerform “Clock Set” on page74.

If both Auto Channel Set and Auto

Clock Set have failed, “– –:– –” is

displayed.

Make sure the cables are connected properly and turn off the
unit’s power once, then turn the unit’s power back on again.
The Country Set display appears on the TV screen; perform
“Auto Set Up” on page10 or “Preset Download” on page 12
again.
IMPORTANT
●To check if the Guide Program numbers have been set
correctly, perform the SHOWVIEW Timer Programming.
(墌pg. 24) (VHS deck only)
●In certain reception conditions, station names may not be
stored correctly, and auto Guide Program Number Set may not
work properly. If the Guide Program numbers are not set
properly when you timer-record a TV programme using the
SHOWVIEW system, the unit will record a TV programme of a
different station. When programming the timer using the
SHOWVIEW system, be sure to check the desired channel is
selected correctly. (墌pg.24, “SHOWVIEW® Tim er
Programming”) (VHS deck only)
●Your unit memorizes all detected stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture. (墌pg. 70, “Delete A Channel”)

INFORMATION

Language for the on-screen display (VHS deck)

Auto Set Up also selects the language automatically for the on-
screen display depending on the Country setting you have made
in step B on page 10 (unless you have selected BELGIUM or
SUISSE), as shown below.
If you want to change the language setting manually, see “On-
screen Language Set (VHS deck)” on page 15.

Language for the on-screen display (DVD deck)

Set manually the on-screen language for the DVD deck.
(墌pg. 16)

Just Clock

Your unit is equipped with the Just Clock function which
provides accurate time keeping through automatic adjustments
at regular intervals, by reading data from a PDC signal. If you
want to take advantage of this function, simply set it to “ON”.
(墌pg. 75, “Just Clock”)
T-V Link Functions
When you connect the unit to your TV via a fully-wired 21-pin
SCART cable (墌pg.9), the following functions are available.
You can use these functions only with a TV offering T-V Link,
etc.*
For details, refer to the instruction manual of your TV.
* Compat ible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.

TV Auto Power On

The TV will turn on and be set to its AV mode automatically
whenever you play a tape.
For details, refer to the instruction manual of your TV.

Unit Auto Standby

You can use your TV’s remote control to turn off the unit.
For details, refer to the instruction manual of your TV.

Direct Rec (VHS deck only)

You can easily start recording the programme that you are
watching on your TV. When you use this function, set “DIRECT
REC” to “ON”. (墌pg. 63)
SUOMI
]
SUOMI ITALIA
]
ITALIANO
PORTUGAL
]
ENGLISH MAGYARORSZÁG
]
MAGYAR
DEUTSCHLAND
]
DEUTSCH ESPAÑA
]
CASTELLANO
POLSKA
]
POLSKI NEDERLAND
]
NEDERLANDS
NORGE
]
NORSK GREECE
]
ENGLISH
SVERIGE
]
SVENSKA OTHER WESTERN
EUROPE
]
ENGLISH
DANMARK
]
DANSK
ÖSTERREICH
]
DEUTSCH OTHER EASTERN
EUROPE
]
ENGLISH
C
ESKÁ
REPUBLIKA
]C
E
c
TINA
XV3EX_01.book Page 13 Friday, August 22, 2003 12:21 PM