JVC HR-XV32E manual 24 EN, Howv IEW Timer, Programming

Filename [XV3EX_07S-VHS.fm]
XV3EX_01.book Page 24 Friday, August 22, 2003 12:21 PM	Masterpage:Left+

24 EN	OPERATIONS ON VHS DECK (cont.)
SHOWVIEW® Timer	C
		Enter the SHOWVIEW number.
Programming	Press the number keys to
	enter the SHOWVIEW number
	of a programme you wish to
With the SHOWVIEW system, timer programming is greatly	record.
simplified because each TV programme has a corresponding	● If you make a mistake, press &
code number which your unit is able to recognize.	and input the correct number.
Before performing the SHOWVIEW Timer			SHOWVIEW SYSTEM
Programming:
● Make sure that the unit’s built-in clock is set properly.
	D Access the SHOWVIEW Program screen.
● Insert a cassette with the safety tab in place. The unit will
come on automatically.	Press OK, then the
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/VCR/DVD switch to the right.	SHOWVIEW Program screen
	appears (if you’re just starting
	out, “P1” appears).

IMPORTANT

Make sure the channel position number you wish to record is displayed; if not, or “TV PROG” shows “– –”, press PR +/– to input the channel position number on which your unit receives the station, then press OK or e.

● If the number you entered is invalid, “ERROR” appears on the TV screen. Press & and input a valid SHOWVIEW number.

E Set the tape speed.

Press p.

A Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

F Set the VPS/PDC mode.

Press VPS/PDC (number key “7”) to select “ON” or “OFF”.

●If “VPS/PDC ON” is displayed on the TV screen, “VPS/PDC” is set to “ON”.

●If “VPS/PDC OFF” is displayed on the TV screen, “VPS/PDC”

is set to “OFF”.

 “VPS/PDC Recording” on page 25.

B Access the SHOWVIEW screen.

Press PROG.

SHOWVIEW SYSTEM

Page 24

August 22, 2003 12:20 pm