Filename [XV3EX_06Index.fm]

 

XV3EX_01.book Page 9 Friday, August 22, 2003 12:21 PM

Masterpage:Right0

INSTALLING YOUR NEW UNIT

EN 9

Basic Connections

It’s essential that your unit be properly connected.

THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

A Check the contents.

Mains outlet

TV aerial cable

Make sure the package contains all of the accessories

 

 

 

listed in “SPECIFICATIONS” on page 79.

Mains power cord

B Situate the unit.

Back of unit

Place the unit on a stable, horizontal surface.

C Connect the unit to TV.

The connection method you use depends on the type of TV you have.

21-pin SCART cable (not provided)

TV

RF cable (provided)

RF Connection

8To connect to a TV with NO AV input connectors —

ADisconnect the TV aerial cable from the TV.

BConnect the TV aerial cable to the ANTENNA IN connector on the rear panel of the unit.

CConnect the provided RF cable between the ANTENNA OUT connector on the rear panel of the unit and the TV’s aerial connector.

AV Connection

8To connect to a TV with AV input connectors —

If your TV is equipped with a 21-pin SCART connector, perform AV connection to improve picture quality during tape playback.

AConnect the aerial, unit and TV as per “RF Connection”.

BConnect an optional 21-pin SCART cable between the L-1 IN/OUT connector on the rear panel of the unit and the TV’s 21-pin SCART connector.

D Connect the unit to mains.

Plug the end of the mains power cord into a mains outlet.

After the connection is completed, perform “Auto Set Up” on page 10.

Page 9

August 22, 2003 12:20 pm

Page 9
Image 9
JVC HR-XV32E Basic Connections, Check the contents, Situate the unit, Connect the unit to TV, Connect the unit to mains