Philips RQ1200 user manual Cleaning the Jet Clean System

18ENGLISH

4Press the on/off button on the Jet Clean System to start the cleaning program.

,, The shaver display stops showing the charging indication.

,, The cleaning light starts to flash and the shaver is automatically lowered into the cleaning fluid.

,, The cleaning light flashes throughout the cleaning program, which takes a few minutes.

Note: RQ1007:The cleaning program takes 4 to 6 minutes.

Note: RQ1008:The auto and eco cleaning programs take 4 to 6 minutes.The intensive program takes approx. 35 minutes.

,, During the first phase of the cleaning program, the shaver automatically switches on and off several times and moves up and down.

,, During the second phase of the cleaning program, the shaver is placed in the drying position, indicated by the flashing drying symbol. This phase takes approx. 2 hours.The shaver stays in this position until the end of the program.

Note: RQ1008:The drying phase takes 1 hour when you have selected the eco program. 

,, After the cleaning program, the charging indication appears on the shaver display (see chapter ‘The display’).

Note: If you press the on/off button of the Jet Clean System during the cleaning program, the program aborts. In this case, the cleaning or drying light stops flashing and the holder moves to the highest position.

Note: If you remove the adapter from the wall socket during the cleaning program, the program aborts.The holder remains in its current position.When you put the adapter back into the wall socket, the holder moves to the highest position.

-- When the cleaning fluid drops below the minimum level, the ‘cleaning chamber empty’ symbol starts to flash and the holder returns to its

starting position.

-- If you use the Jet Clean System to clean your shaver every day, you

need to refill the cleaning chamber approx. every 15 days.

Cleaning the Jet Clean System

Clean the cleaning chamber every 15 days.

You can wipe the outside of the Jet Clean System with a damp cloth.