Philips RQ1200 user manual RQ1296CC, Empty and rinse the cleaning

26 ENGLISH

Problem	Possible cause	Solution
RQ1296CC,	The cleaning fluid in the cleaning chamber	Empty and rinse the cleaning
RQ1295CC,	is soiled.	chamber and refill it with new
RQ1290CC,		cleaning fluid.
RQ1286CC,
RQ1285CC,
RQ1284CC,
RQ1280CC,
RQ1275CC,
RQ1265CC,
RQ1260CC,
RQ1252CC,
RQ1251CC,
RQ1250CC only:The
shaver is not entirely
clean after I clean it in
the Jet Clean System.

The cleaning fluid level is too low. If the fluid volume in the cleaning chamber drops below the minimum level during the cleaning program, the program aborts.The cleaning light and the ‘cleaning chamber empty’ symbol flash at intervals and the holder returns to its starting position.

Refill the cleaning chamber with cleaning fluid to a level between the two lines (see chapter ‘Cleaning and maintenance’).

The Jet Clean System does not work when I press the on/off button.

The shaver is not fully charged after I charge it in the charger/Jet Clean System.

You have used another cleaning fluid than the original Philips cleaning fluid.

The Jet Clean System is not connected to the mains.

You have not placed the shaver in the Jet Clean System properly, so there is no electrical connection between the Jet Clean System and the shaver.

You have not placed the shaver in the charger/Jet Clean System (specific types only) properly.

Only use HQ200 Philips Cleaning Fluid.

Put the small plug in the Jet Clean System and put the adapter in the wall socket.

Press the shaver tightly into the holder to lock it into place.

Make sure you press the shaver until it locks into place.