Philips SCD464 EN Troubleshooting, Problem Possible cause Solution, Baby unit and parent unit

EN Troubleshooting

Problem	Possible cause	Solution
No sound on parent unit.	Volume off or too low.	Turn VOLUME control (B-8) on
		parent unit downwards.
	Units out of range.	Move parent unit closer to baby
		unit.
No connection	Parent unit out of range of	Move parent unit closer
between units.	tansmitted signal.	to baby unit.
	Units are set to different	Set channel selection switches
	channels.	(A-8, B-7) to the same
		position on both units.

Interference or poor	Mobile or cordless phone(s)
reception.	too close to baby monitor.
	Interference from other
	baby monitors in the
	neighborhood.
	Battery power running low.
	Transmitted signal is out of
	range; e.g. there are too many
	walls and/or ceilings between
	baby unit and parent unit.

Move phone(s) away from baby monitor.

Switch both units to another channel using the channel selection switch (A-8, B-7).

Replace batteries.

Move parent unit closer to baby unit.

Parent unit located too close to	Move parent unit away
a window and picking up	from window.
interfering signals from other
appliances.

12