Philips SCD464 Getting your baby monitor ready

EN
7
Baby unit
The baby unit can be mains or battery operated.
When batteries are installed,you have an automatic back up in
case of mains failure.
Mains operated use
1Connect the power adapter cord to the power supply jack
(DC 9V ——<<++- A-2) of the baby unit.
2Connect the AC power adapter (A-3) to a wall outlet.
➜The baby unit is now ready for mains operated use.
Battery operated use
1Remove the battery compartment cover (A-9) of the baby
unit,using a coin.
2Insert four 1,5V AA batteries,noting the + and –
configuration inside the battery compartment (batteries are
not supplied,we recommend Philips Alkaline batteries).
3Close the battery compartment cover (A-9),using a coin.
➜The baby unit is now ready for battery operated use.
Parent unit
The parent unit can be mains or battery operated.
When batteries are installed,you have an automatic back up in
case of mains failure.
Mains operated use
1Connect the power adapter cord to the power supply jack
(DC 9V ——<<++- B-4) of the parent unit.
2Connect the AC power adapter (B-5) to a wall outlet.
➜The parent unit is now ready for mains operated use.
Getting your baby monitor ready