Philips SCD468 user manual EN Using your baby monitor, Your can now monitor you baby

EN Using your baby monitor

1Position both units in the same room to test the connection. Make sure the baby unit is at least 1 meter / 3 feet away from the parent unit.

2Press the ON/OFF button (A-1) to switch on the baby unit.

>The POWER light (A-7) lights up green.

3Switch on the parent unit using the ON/OFF switch (B-9) and adjust the volume to the level you prefer using the VOLUME control (B-9).

>The POWER light (B-10) lights up green.

>When connection has been established between the units, the LINK light (B-8) on the parent unit lights up green.

4Position the baby unit at least 1 meter / 3 feet away from your baby.

5Position the parent unit at the desired place within the operating range of the baby unit but at least 1 meter / 3 feet away from the baby unit. For more information on the operating range see ‘Technical specifications’.

➜Your can now monitor you baby!

8