Philips SCD468 Avoiding interference (channel selection)

EN
9
Avoiding interference (channel selection)
Always make sure that the CHANNEL selection switches (A-9,
B-11) inside the battery compartments on both units are set to
the same position!
With the CHANNEL selection switches (A-9,B-11) you can
select sixteen different channel positions.If you experience
interference from other baby monitors,radio devices, etc.select
a different channel.
1Open the battery compartment covers (A-10,B-12) of both
units.
• Parent unit:slide down the cover (B-12).
• Baby unit:use a coin.
2Lift up the rechargeable battery pack (B-14) of the parent
unit.
If you are operating the baby unit on battery power,remove
the batteries from the unit.
3Use a small,flat screwdriver to rotate the inner circle of the
channel selection switches (A-9,B-11) to the desired position.
Make sure both units are set to the same channel.
4Put batteries and battery pack back in place.
5Close the battery compartment covers (A-10,B-12).
Features