Ethernet port required

Network hub

ENGLISH 15

Installing

2.3 If you want to make a wired connection Option C

In this configuration you already have a TV, and a computer with a free ethernet connector (or a wired network with a free ethernet connector).

You will be connecting an Ethernet network cable between the SL400i and your computer or network.

You will connect the SL400i to the TV.

At the end, you will be able to send music, photos, and movies from your computer to your TV.

Ethernet ports and cables look just like telephone connections and lines, but are thicker and wider. Ethernet (RJ-45) connectors have eight contacts, whereas standard telephone line (RJ-11) connectors have four or six.

Important: only use CAT.5 shielded Ethernet cable (STP).

OR

1a Use a crossover Ethernet cable if you want to connect the SL400i directly to your computer.

In a crossover Ethernet cable, the arrangement of the coloured wires changes between the two ends.

Push one end of the Ethernet cable into the connector marked 'Ethernet' on the back of the SL400i.

Push the other end into the Ethernet connector of your computer.

Note:Your computer needs to have an Ethernet connector available.

OR

1b Use a straight-through Ethernet cable if you want to connect the SL400i to an existing computer network.

In a straight-through Ethernet cable, both ends have the same arrangement of coloured wires.

Push one end of the Ethernet cable into the connector marked 'Ethernet' on the back of the SL400i.

Push the other end into a free Ethernet connector on your central network device, like a hub, switch or router.

Note:Your network needs to have an Ethernet connector available.

Page 15
Image 15
Philips SL400i manual If you want to make a wired connection Option C, Important only use CAT.5 shielded Ethernet cable STP