Philips Universal 3 manual SET-UP for USE, TV VCR SAT Your equipment is a Philips brand

Instructions for use

Try other shift/key combinations on your equipment to discover which functions are available.

Remember that you can’t get access to additional functions if these functions were not available on the original remote control of your equipment!

To switch on teletext.

To enlarge the teletext display on screen.

To stop changing teletext pages.

To switch off teletext.

If you use the memory out key (fi) to access the next teletext page on your Philips TV, see Troubleshooting.

Fasttext	VCR
Red	Rewind
	Record
Green	Stop
Yellow	Play
Blue	Forward
	Pause

SET-UP FOR USE

A D V I C E

Carefully read the complete procedure before starting!

TV VCR SAT Your equipment is a Philips brand:

1 Press the mode selector key for the device you want to operate.

2 Press the power key to test.

–The green indicator LED under each device (TV, VCR or SAT) lights up to confirm the mode you’re in.

C H E C K

Press a few keys to check correct response. If response is not correct, go to the next paragraph.

English

3