Philips Universal 3 manual Make a Note of Your Code

Instructions for use

TV VCR SAT

1 6

1

2

3

4

7 Press the power key to lock the correct code in the SBC
RU530’s memory.	English
– The green LED flashes twice.

C H E C K

Switch equipment on manually. Press a few keys to check correct response. If response is not correct, repeat procedure beginning at step 1.

N O T E

-The search time averages about 90 seconds. (Maximum search time is 5 minutes for TV, 2 minutes for VCR and 4 minutes for SAT).

-Autosearch stops automatically after all codes have been tested.

MAKE A NOTE OF YOUR CODE!

A D V I C E

Carefully read the complete procedure before starting!

Note the code inside the battery case and in the codelist in the centre of this booklet. This may be useful if you ever need to set up the SBC RU530 again. You used the auto search procedure or you forgot to note the code after set up? No problem! You can still ‘read out’ the code from the remote:

1 Make sure you’ve selected the right mode with the mode selector key.

2 Press and release keys 1 and 6 simultaneously.

Important: after pressing the keys, you have to release them immediately!

–The green LED lights up.

3 Press the two digits key.

–The green LED goes out.

4 Press key 1 and count the number of times the green LED flashes. This is the first digit of the 4-digit code. (No flashes means the digit is zero.)

5 Press key 2 and count the number of flashes for the second digit.

6 Press key 3 and count the number of flashes for the third digit.

7 Press key 4 and count the number of flashes for the forth digit.

8 Note the code.

5