Pages can be scrolled through by pushing the Joystick to the left or right on the first or last column of the menu. Pushing the Joystick to left on the „NO” column (01 ~ 08) of the menu to scroll to the previous page. Push the Joystick to right on the „END” column to go to the next page.
1.Press Menu to display the main menu on the monitor. Select the Area Title option by pushing the Joystick up or down and push to right to enter the detail menu.
2.Select the area number by pushing the Joystick up or down. Select Start, End or number column to be set by pushing the handle to the right or left. The selected column will be highlighted.
3.To enter area title, select the number column and rotate the handle clockwise or counterclockwise. You can select alphanumeric characters by rotating the handle. Move to the next character by pushing the Joystick to the right. To finish entering the title, push the Joystick down.
4.To adjust panning limit, press the Ctrl/PGM key and hold down. Then use the Joystick to aim the desired direction. The end limit must be in an increasing direction. (Start < End).
5.When you press the Ctrl/PGM key, the current position of the pan will be displayed in the highlighted column. With this feature, you can easily set the next start point as the previous end point.
6.Select the Save and Exit option by pushing the Joystick up or down. Save and exit the program by pushing the Joystick to the right. Press ESC to exit the program without saving.
6.Pressing the Home key will delete programmed data. (Angles will be turned ==== immediately.)
3.11 Privacy Zone (Seventh Item of Main menu) Hide up to 8 unwanted views in a camera.
| PRIVACY ZONE SETUP | ||
NO | TITLE |
| METHOD |
01 | xxxxxxxxxxxxxxxx | ON | BLOCK |
02 | xxxxxxxxxxxxxxxx | OFF | V.OFF |
03 | xxxxxxxxxxxxxxxx | NONE | ==== |
04 | xxxxxxxxxxxxxxxx | NONE | ==== |
05 | xxxxxxxxxxxxxxxx | NONE | ==== |
06 | xxxxxxxxxxxxxxxx | NONE | ==== |
07 | xxxxxxxxxxxxxxxx | NONE | ==== |
08 | xxxxxxxxxxxxxxxx | NONE | ==== |
SAVE AND EXIT (ESC TO CANCEL)
1.Press Menu to display the main menu on the monitor. Select the Privacy Zone option by pushing Joystick up or down and push to right to enter the detail menu.
2.Select the privacy zone number by pushing the Joystick up or down.
3.To enter the zone name, rotate the handle clockwise or counterclockwise. You can select alphanumeric characters by rotating the handle. Move to the next character position by pushing the Joystick to the right. To finish entering the title, push the Joystick down or press the Enter key.
4.To adjust the „marked” (privacy) area, press and hold down the Ctrl/PGM key and then use the Joystick (direction and zoom) until you get desired view. Release the key, the right column will be set to ON.
5.You can overwrite an existing zone. Use the Home key to delete the marked zone, or push the Joystick to the right or left to turn the stored zone On or Off.
6.Select the Save and Exit option by pushing the Joystick up or down. Save and exit the program by pushing the Joystick to the right. Press ESC to exit the program without saving.
6.Press the Home key to delete programmed privacy zone.
21
