VIDEO PLUS+ |
|
|
PLUSCODE NUMBER | REP. |
|
èONCE | p |
________________________________
REP.pSELECT STOREpOK TIMER LISTpTIMER
Selecting onetime/daily/weekly recordings
Using SELECT , select from the following options: 'ONCE': Recording once
'WEEK.': Repeated weekly recordings (every week on the same day)
ENGLISH
TIMER
VPS
DATE REP. PROG. START PDC END
21
________________________________
REP.pSELECT STOREpOK
4Confirm with OK .
The following message appears on the screen: 'SELECT PROG.
NR.'
The programme number of the TV channel has not yet been assigned to the PlusCode number. Using the number buttons
The following message appears on the screen: 'PLUSCODE NUMBER
NOT VALID'
The entered PlusCode number is incorrect. Correct your instructions or end with MENU .
Check the time/date (see chapter 'Installing your video', section 'Setting the time and date').
The following message appears on the screen: 'MO-FR
PROGRAMMING NOT POSSIBLE FOR WEEKEND'
A daily recording was entered for the wrong day. Daily programming can only be used for recordings to be made from Monday to Friday.
5The decoded data appears after confirmation. You can go back at any time to change the data.
Switching on 'VPS/PDC' in the 'START' input field |
|
|
| ||
Select the 'START' input field using | TIMER . Using | SELECT switch on | |||
'VPS/PDC' | (']' lights up). If you | press SELECT again, you will switch | |||
'VPS/PDC' | off (']' goes out). |
|
|
|
|
6When all information is displayed correctly, confirm with OK . The programming information is stored in a TIMER block.
7Insert a cassette with an intact security tab (unprotected).
8 | Switch off with STANDBY/ON . |
| The programmed recording will only function when the video |
| recorder is switched off with STANDBY/ON . |
| If any of the TIMER blocks are in use, ' ' will light up on the video |
| recorder display. |
Programming a recording (TIMER) | 35 |
|
