Special installation functions

Youcan select one of the following installation functions in
orderto adapt the video recorder to your own specific
requirements.

Automatic TV Channel Allocation

(FOLLOW TV)

Withthis function the video recorder maintains the same
channelsequence as on the TV set, in case you connected
yourvideorecorder to a TV set without scart cable. This only
functionsif the video recorder (socket EXT.1AV 1 )and the TV
setare connected with a scart cable.
DAdditionalequipment connected to socket
EXT.2AV 2 mustbe switched off.
DWith’Connecting with scart cable and ’Easy
Link/NexTView’,this function will start the data
transfer.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button. The main menu appears.
cSelectthe line ’INSTALLATION’ with the P=or
;Pbuttonand confirm with the Pbutton.
MAIN MENU
INSTALLATION
AUTOINSTALL
FOLLOW TV
MANUAL SEARCH
TV CHANNEL ALLOCATION
OPTIMIZE MODULATOR
TIME/DATE
________________________________
TO EXIT
PRESS MENU
dSelectthe line ’FOLLOW TV’ with the P=or ;P
buttonand confirm with the Pbutton.Take notice of
themessage on the TV screen.
ePressthe OK button.’TV01’ appears in the video
recorderdisplay.
TV01
fSelectprogramme number ’1’ on the TV set.
gConfirmwith the OK buttonon the video
recorder-remotecontrol. The video recorder compares
theTV channels on the TV set and the video recorder.
Ifthe video recorder found the same TV channel as the
TVset, then it stores it at ’P01’.
DWhen’NOTV’ (no signal from TV set) appears in the
display,the TV channels can not be allocated
automatically.In this case, read paragraph: ’Manual
TVchannel allocation’.
hWaituntil e.g.: ’TV02’ appears.
iSelectthe next programme number, e.g.: ’2’ on the TV set.
jConfirmwith the OK buttonon the video
recorder-remotecontrol.
DIfyou have allocated the wrong TV channeL, you
cango back one step with the Qbutton.
kRepeatsteps hto juntil all TV channels have been
allocated.
lToend, press the MENU button.
9