Pioneer AVD-W6010 Selecting the Audio, Video, and External Output, Select the desired source

About the RCA Video and Audio Outputs of this Unit

When you connect a separate piece of AV equipment such as a second display to the RCA video and audio output jacks of the hide-away unit, you can select the source for output with the SEL/POWER button,

•The video and audio source of the RCA outputs of this unit cannot be selected indepen- dently.

•The V.SEL, SP.SEL and Volume control buttons will have no effect even if operated.

CAUTION

Never position the display connected to the RCA output jack of the hide- away unit, driver can view the picture while the vehicle is moving.

Selecting the Audio, Video, and External Output

When three icons are displayed in a line, you can simultaneously change the sources of each icon.

If Display and Built-in speaker are set for independent switching, switch them simultane- ously. (Refer to pages 9 and 11.)

•Select the desired source.

VCR 1

VO L 1 2

Each press changes the source ...

Each press of the SEL/POWER button selects the desired source in the following order: [VCR1] = [VCR2] = [RGB] = Exit to [VCR1]

Note:

•[RGB] indicates the equipment connected to the hide-away unit’s RGB input. (The source does not switch to [RGB] when nothing is connected to the RGB input.)

•[VCR1] and [VCR2] are audio and video from the AV equipment connected to the VCR1 or VCR2 input terminal. (Refer to page 24.)

•Verify the correct connection with the AV equipment connected to VCR1 or VCR2.

•VCR2 is selectable only if either [VIDEO] or [S-VIDEO] has been chosen in [INPUT SETTING] . (Refer to page 17.)

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

10