Pioneer AVD-W6010 owner manual Connecting Automatic Input Switching Lead

Connecting the System

Connecting ”AUTOMATIC INPUT SWITCHING“ Lead

When using this product with a back-up camera, automatic switching to VCR1 video when the gear shift is moved to the REVERSE (R) position is possible.

Connect the back-up camera to the VTR1 input. (Refer to page 24.)

Hide-away Unit

Power cable (Refer to page 25.)

Note:

•When you have completed lead wire connection, perform the appropriate settings for the connection method.

(Refer to page 19.)

Fuse resistor	Light green/Orange
	Of the two lead wires connected to the back lamp,
	connect the one in which the voltage changes when
	the gear shift is in the REVERSE (R) position.
	This connection enables the unit to sense whether
	the car is moving forwards or backwards.

CAUTION

This function is designed for use with a back-up camera only. Users may connect the VTR 1 input with “AUTOMATIC INPUT SWITCHING” only to such a back-up camera. Users must not connect any other devices to the VTR 1 input with “AUTOMATIC INPUT SWITCHING”.

29