Fitting and Removing the Display
Precaution:
•To prevent failure, be sure to turn the ignition switch or system power OFF before fitting or removing the display. Also take care not to grip the screen or buttons too firmly or to drop the display.
•Do not let any water get on the terminals on the display or on the base and do not allow the ter- minals to be shorted by a metal object or the like. This can cause system breakdown.
•Be careful not to touch terminals on the display or on the base. Doing so may cause connection failures. If any terminals are stained, wipe them with a clean dry cloth.
To fit the display
1. Fit part 1 of the display into the | 2. Slide the display downward until it |
grooves 2 on the left and right of | clicks into place. |
the base. |
|
Base |
|
To remove the display
• Pull the lock release lever 3 upward and hold in that position, then slide the display upward and detach it from its base.
• To prevent theft of the display, remove
the display when leaving the vehicle. | Base |
|
3
