Pioneer AVD-W6010 owner manual Key Finder, Component Parts and Features

Key Finder

Component Parts and Features

1SEL/POWER button

Selects the system’s audio and video simultaneously. If AV equipment is connected to the system’s RCA audio and video output terminals, the audio and video of the source selected with this button are generated.

Pressing this button for 2 seconds also switches power ON/OFF.

62/3 buttons

Adjust the item when the setup menu is displayed.

7Ambient light sensor

Senses ambient light. This system auto- matically adjusts the brightness of the display to compensate for ambient light.

2V.SEL button

Selects only the display’s video.

3SP.SEL button

Selects only the built-in speaker’s audio.

4WIDE/MENU button

Changes the method of enlarging 4:3 video to 16:9 video. Pressing this but- ton for 2 seconds, and displayed the setup menu. Once the setup menu is displayed, its menu is switched each time the button is pressed.

8Signal receptor

This receiver receives signals from the remote controller supplied with the mobile navigation unit and other AV equipment.

9Built-in speaker

Outputs sound from audio equipment connected to this product.

0Lock release lever

(Refer to page 3.)

5Volume control (∞/5) buttons

Adjust the volume of the built-in speaker 9, or change setup items when the setup menu is displayed.

Note:

•Never set the volume so high that you cannot hear outside traffic and emergency vehicles.

7