Detailed instructions

 

 

3

Make the call.

Registering a connected

Refer to Introduction of Bluetooth telephone op-

cellular phone

erations on page 34.

(Function of AVH-P1400DVD)

4

End the call.

You can register a phone that is temporarily

Refer to Introduction of Bluetooth telephone op-

connected to this unit in order to take full ad-

erations on page 34.

vantage of the features available with

 

 

Note

Bluetooth wireless technology. Only one cellu-

lar phone can be registered.

Entering phone number mode cannot be oper-

 

 

ated unless a Bluetooth telephone is connected

1 Start registering a connected cellular

to this unit.

phone.

Refer to Introduction of Bluetooth telephone operations on page 36.

Section

14

instructions Detailed

Setting the private mode

(Function of AVH-P4400BH/AVH-P3400BH/ AVH-P2400BT)

During a conversation, you can switch to private mode (talk directly on your cellular phone).

Refer to Introduction of Bluetooth telephone operations on page 34.

Using a cellular phone to initiate a connection

(Function of AVH-P1400DVD)

A Bluetooth wireless connection can be established from your phone by putting the unit into initiating a connection mode.

You may need to refer to the operation manual that came with your phone if you are unsure how to initiate a connection from your phone.

1Put the unit in initiating a connection mode.

Refer to Introduction of Bluetooth telephone op- erations on page 36.

2Use a cellular phone to connect to this unit.

# Operation varies depending on the type of cel- lular phone.

# You may need to enter the link code on your cellular phone to complete the connection.

2Use cellular phone to register to this unit.

If registration is successful, the device name of the connected phone is displayed in the se- lected assignment.

# If the assignment is already taken, the device name will be displayed. To replace an assignment with a new phone, first delete the current assign- ment.

# If registration failed, the device name of the connected phone will not be displayed in the se- lected assignment. In such cases, return to step

1and try again.

Voice recognition

(Function of AVH-P1400DVD)

If your cellular phone features voice recognition technology, you can make a call by voice commands.

!Operation varies depending on the type of cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions.

1 Start voice recognition.

Refer to Introduction of Bluetooth telephone operations on page 36.

2 Say the name of your contact aloud.

En 55