Section

15Menu operations

Changing the picture adjustment

You can adjust the Brightness (brightness), Contrast (contrast), Color (color) , Hue (hue), Dimmer (dimmer), Temperature (tempera- ture), Black Level (black level) and

Dot Adjustment (RGB dot clock adjustment) for each source and rear view camera.

!You cannot adjust Color, Hue, Contrast and Black Level for the audio source.

1 Display the system menu.

Refer to Introduction of menu operations on page 57.

#You cannot adjust the picture adjustment for the rear view camera when Camera Polarity is set to Off. (Refer to Setting the rear view camera (back up camera) on the previous page.)

#You can adjust Hue only when the color sys- tem is set to NTSC.

#With some rear view cameras, picture adjust- ment may not be possible.

4Touch cor dto adjust the selected item.

Each time you touch cor d, the level of the selected item increases or decreases.

# Dimmer can be adjusted from +1 to +48.

2 If you are adjusting the

Picture Adjustment, select the unit.

 

NAVI

 

Adjusting the Picture Adjustment

 

 

for the Navigation system.

 

 

 

 

 

 

 

 

 

 

 

 

 

Rear

Adjusting the Picture Adjustment

 

View

 

for the rear view camera.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Source

 

Adjusting the Picture Adjustment

 

 

for the source.

 

 

 

 

 

 

 

 

3Touch any of the following touch panel keys to select the function to be adjusted. Picture Adjustment items are displayed.

!Brightness – Adjusts the black intensity

!Contrast – Adjusts the contrast

!Color – Adjusts the color saturation

!Hue – Adjusts the tone of color (red or green is emphasized)

!Dimmer – Adjusts the brightness of the dis- play

!Temperature – Adjusts the color tempera- ture, resulting in a better white balance

!Black Level – Emphasizes the dark portions of images making the difference between bright and dark more distinct

!Dot Adjustment – Adjusts phase shifting by dot clock when a Navigation system is connected

#Temperature can be adjusted from +3 to –3.

5Touch Black Level and Dot Adjustment to adjust.

# Black Level can be set on or off.

# Dot Adjustment can be set to 1 or 2.

Notes

!You cannot operate this function while driving.

!Different Brightness/Contrast/Dimmer set- tings can be set for when the illumination switch is on and when it is off.

Auto EQ (auto-equalizing)

The auto-equalizer automatically measures the car’s interior acoustic characteristics, and then creates an auto-equalizer curve based on that information.

!To perform this function, dedicated micro- phone (e.g. CD-MC20) is required.

WARNING

As a loud tone (noise) may be emitted from the speakers when measuring the car's interior acoustic characteristics, never perform auto TA or auto EQ while driving.

CAUTION

!Thoroughly check the conditions before per- forming auto EQ as the speakers may be da- maged if these functions are performed when:

68 En