Section

15Menu operations

4 Display the system menu.

Refer to Introduction of menu operations on page 57.

5Touch Auto EQ Measurement to enter auto EQ measurement mode.

6Plug the microphone into the micro- phone input jack on this unit.

(AVH-P3400BH/AVH-P2400BT/AVH- P1400DVD)

9Store the microphone carefully in the glove compartment or another safe place. If the microphone is subjected to direct sun- light for an extended period, high tempera- tures may cause distortion, color change or malfunction.

10Press h(eject) to close the panel. (AVH-P4400BH only)

(AVH-P4400BH)

7Touch Start to start auto EQ.

8When the 10-second countdown starts, get out of the car and close the door within

10seconds.

A measurement tone (noise) is emitted from the speakers, and auto EQ measurement be- gins.

When auto EQ is completed, Complete is dis- played.

When the car’s interior acoustic characteris- tics cannot be measured correctly, an error message will be displayed. (Refer to Under- standing auto EQ error messages on page 96.)

# It takes about nine minutes for auto EQ mea- surement to be completed when all the speakers are connected.

# To stop auto EQ, touch Stop.

70 En