Section
14
Detailed instructions
Connecting a Bluetooth | Displaying Bluetooth |
audio player | Device address |
(Function of
A Bluetooth wireless connection can be established by putting the unit into initiating a connection mode.
%Put the unit in initiating a connection mode.
Refer to Bluetooth audio operations on page 37.
This unit is now on standby for connection from Bluetooth audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to this unit is automatically established.
(Function of
This unit displays its Bluetooth Device ad- dress.
%Touch Device Information to display de- vice information.
Refer to Introduction of Bluetooth telephone op-
The Bluetooth Device address is displayed.
Connecting to a Bluetooth device automatically
(Function of
If this function is set to on, a connection between your Bluetooth device and this unit will take place automatically as soon as the two devices are less than a few meters apart. Initially, this function is set to on.
1Touch Auto Connect to turn automatic connection on.
Refer to Introduction of Bluetooth telephone op- erations on page 36.
If your Bluetooth device is ready for a Bluetooth wireless connection, a connection to this unit will automatically be established.
# To turn automatic connection off, touch Auto Connect again.
2Turn your vehicle’s ACC switch off and
on.
Once you turn your vehicle’s ACC switch on
again, a connection is established auto- matically.
56
En