Menu operations

Section

15

4Touch Rear Speaker on the system menu to switch the subwoofer output or full-range speaker.

# When no subwoofer is connected to the rear output, select Full (full-range speaker).

# When a subwoofer is connected to the rear output, select Subwoofer (subwoofer).

Notes

!Even if you change this setting, there will be no output unless you turn the subwoofer out- put on (refer to Using subwoofer output on page 59).

!Both rear speaker lead outputs and RCA rear output are switched simultaneously in this setting.

Switching sound muting/ attenuation

Sound from this system is automatically muted or attenuated when a signal from equipment with a mute function is received.

!Sound from this system returns to normal when the muting or attenuation is can- celed.

1 Display the system menu.

Refer to Introduction of menu operations on page 57.

2Touch Mute/ATT until the desired set- ting appears.

Touch Mute/ATT until the desired setting ap- pears in the display.

!Mute – Muting

!ATT –20dB – Attenuation (ATT –20dB has a stronger effect than ATT –10dB)

!ATT –10dB – Attenuation

!Off – Turns the sound muting/attenuation off

Notes

!When Mute is displayed, the sound is turned off and no audio adjustments can be made.

!When ATT is displayed, the sound is attenu- ated and only the volume can be adjusted. (No other audio adjustments can be made.)

!Operation returns to normal when the phone connection is ended.

Selecting the system language

The system language can be selected from nine languages.

If text information such as the title name, artist name or a comment is embedded in a Eur- opean language, they can also be displayed on this unit.

!The language can be changed for the fol- lowing:

—System menu

—On-screen display (English and Russian only)

—Multi language setting for DivX (English and Russian only)

—Language for cautions

Some operations on this unit are prohib- ited from use while driving or require careful attention when operated. In such cases, a caution will appear on the display. You can change the language for caution messages with this setting.

!If the embedded language and the selected language setting are not the same, text in- formation may not display properly.

!Some characters may not be displayed properly.

1 Display the system menu.

Refer to Introduction of menu operations on page 57.

2Touch System Language on the system menu to select the desired language.

3Touch the desired language.

English (English)—Français (French)— Deutsch (German)—Español (Spanish)

—Русский(Russian)—Português (Portu-

guese)—ﺔﻴﺑﺮﻌﻟﺍ (Arabic)— (Persian)

— (Hebrew)

operations Menu

En 65