Section

Other functions

16

Adjusting the response positions of the touch panels (Touch Panel Calibration)

If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel. There are two adjustment methods: 4-point adjustment, in which you touch four corners of the screen; and 16-point adjustment, in which you make fine-adjustments on the entire screen.

!Touch the screen gently for adjustment. Forcefully pressing the touch panel may da- mage the touch panel. Do not use a sharp pointed tool such as a ballpoint pen or me- chanical pen. Doing so may damage the screen.

!If the touch panel cannot be adjusted prop- erly, consult your local Pioneer dealer.

1 Turn the unit off.

Refer to Basic operations on page 14.

2Press and hold HOME to start Touch Panel Calibration.

The 4-point touch panel adjustment screen ap- pears.

3Touch each of the arrows on the four corners of the screen.

# To cancel the adjustment, press and hold HOME.

4Press HOME to complete 4-point adjust- ment.

Data for the adjusted position is saved.

# Do not turn off the engine while the data is being saved.

5Press HOME to proceed to 16-point ad- justment.

The 16-point touch panel adjustment screen appears.

# To cancel the adjustment, press and hold HOME.

6Gently touch the center of the + mark displayed on the screen.

After you touch all the marks, the data for the adjusted position is saved.

# Do not turn off the engine while the data is being saved.

7Press and hold HOME to complete the adjustment.

Using an AUX source

A separately sold auxiliary device such as a VCR or portable device can be connected to this unit. When connected, the auxiliary device is automatically recognized as an AUX source and is assigned to AUX.

About AUX connection methods

You can connect auxiliary devices to this unit.

Mini pin plug cable (AUX)

When connecting an auxiliary device using a mini plug cable

iPods and portable audio/video players can be connected to this unit via mini plug cable.

!If an iPod with video capabilities is con- nected to this unit via 3.5 mm plug (4 pole) cable (such as the CD-V150M), you can enjoy the video contents of the connected iPod.

!A portable audio/video player can be con- nected by using a 3.5 mm plug (4 pole) with an RCA cable (sold separately). However, depending on the cable, a reverse connec- tion between the red (right side audio) cable and yellow (video) cable may be re- quired in order for the sound and video image to be reproduced correctly.

%Insert the stereo mini plug into the AUX input jack on this unit.

Refer to Installation on page 77. Refer to What’s what on page 11.

functions Other

En 75