Menu operations

Section

15

1 Turn the unit off.

Refer to Basic operations on page 14.

2Press HOME to switch to the HOME dis- play.

3Touch System key.

System menu is displayed.

4Touch Bluetooth Version Information to display to the version of the Bluetooth module of this unit.

Setting the rear view camera (back up camera)

CAUTION

Pioneer recommends the use of a camera which outputs mirror-reversed images. Otherwise, the screen image will appear re- versed.

This unit features a function that automatically switches to the rear view camera video (R.C IN) when a rear view camera is installed on your car and the shift lever is moved to the REVERSE (R) position. (For more details, consult your dealer.)

!After you set up the rear view camera set- ting, move the shift lever to REVERSE (R) and confirm that the rear view camera video is shown on the display.

!Change this setting if the display switches to the rear view camera video by error while you are driving forward.

!To stop watching the rear view camera video and return to the source display, press and hold MUTE.

!Touch the RearView source icon to display the rear view camera image while driving. Touch the source icon again to turn the rear view camera off. For details, refer to Se- lecting a source using the touch panel keys on page 15.

1 Display the system menu.

Refer to Introduction of menu operations on page 57.

2Touch Camera Polarity on the system menu to select the appropriate setting.

!Battery – When the polarity of the con- nected lead is positive while the shift lever is in REVERSE (R) position

!Ground – When the polarity of the con- nected lead is negative while the shift lever is in REVERSE (R) position

!Off – When a rear view camera is not con- nected to this unit

Note

You can also switch the rear view image by pressing the touch key, regardless of the

Camera Polarity setting on the sytem menu. Refer to Basic operations on page 14.

Setting the video signal

When you connect this unit to an AV equipment to this unit, select the suitable video signal setting.

!As this function is initially set to Auto, the unit will automatically adjust the video sig- nal setting.

!You can operate this function only for the video signal input into the AV input.

1 Display the system menu.

Refer to Introduction of menu operations on page 57.

2Touch Video Signal Setting on the func- tion menu.

Video Signal Setting items are displayed.

!AV – Adjusts the AV video signal

!AUX – Adjusts the AUX video signal

!Camera – Adjusts the rear view camera video signal

3Touch cor dto select the desired video signal appears. Auto—PAL—NTSC—PAL-M—PAL-N—

SECAM

operations Menu

En 67