Section

15Menu operations

#If you want to switch between the device names and Bluetooth device addresses, touch the icon.

Switching between the device names and Bluetooth device ad- dresses.

#To cancel searching, touch Stop.

#If five devices are already paired,

Memory Full is displayed and pairing cannot be performed. In such cases, delete a paired device first. Refer to this page.

#If no device can be found, Not Found is dis- played. In such cases, check the status of the Bluetooth device and search again.

4Touch a device name to select the de- vice you want to connect to.

While connecting, Pairing is displayed. If the connection is established, Paired is displayed.

!6-digit number appears on the display of this unit. Once the connection is estab- lished, this number disappears.

#If the connection fails, Error is displayed. In such cases, try again from the beginning.

#The PIN code is set to 0000 as the default, but can be changed. Refer to Entering PIN code for Bluetooth wireless connection on the next page.

#Once the connection is established, the de- vice name is displayed.

Touch the device name to disconnect.

#If you want to delete a paired Bluetooth tele- phone, display Delete OK?. Touch Yes to delete the device.

Deleting a paired device.

#Never turn the unit off while the paired Bluetooth telephone is being deleted.

Using a Bluetooth device to pair

(Function of AVH-P4400BH/AVH-P3400BH/ AVH-P2400BT)

If you cannot open the connection between your Bluetooth device and this unit from your Bluetooth device, you can use this function to establish a connection.

1Display the Bluetooth Connection Menu.

Refer to Introduction of Bluetooth telephone op- erations on page 34.

2Touch Special Device to select the spe- cial device.

# Bluetooth devices that are difficult to establish a connection with are called special devices. If your Bluetooth device is listed as a special device, select the appropriate one.

3Touch the special device list to open the connection.

This unit is now on standby for a connection with the Bluetooth device.

# If three devices are already paired,

Memory Full is displayed and pairing cannot be performed. In such cases, delete a paired device first. Refer to this page.

4Use your Bluetooth device to establish a connection.

The connection method is different depending on the Bluetooth device. Refer to the manual for your Bluetooth device to establish a con- nection.

While connecting, Pair your phone is dis- played. If the connection is established, Paired is displayed.

# If the connection fails, Error is displayed. In such cases, try again from the beginning.

# You may also need to enter a PIN code into this unit. If your telephone requires a PIN code to establish a connection, look for the code on the telephone or in its accompanying documenta- tion.

# The PIN code is set to 0000 as the default, but can be changed. Refer to Entering PIN code for Bluetooth wireless connection on the next page.

72 En