Installation
Connecting the units | WARNING |
|
|
| |
|
|
|
| ||
WARNING | ! LIGHT GREEN LEAD AT POWER CON- | ||||
NECTOR IS DESIGNED TO DETECT | |||||
! To avoid the risk of accident and the potential | |||||
PARKED STATUS AND MUST BE CON- | |||||
violation of applicable laws, no viewing of | |||||
NECTED TO THE POWER SUPPLY SIDE | |||||
front seat video should ever occur while the | |||||
OF THE PARKING BRAKE SWITCH. IM- | |||||
vehicle is being driven. Also, rear displays | |||||
PROPER CONNECTION OR USE OF | |||||
should not be in a location where they are visi- | |||||
THIS LEAD MAY VIOLATE APPLICABLE | |||||
bly distracting to the driver. | |||||
LAW AND MAY RESULT IN SERIOUS IN- | |||||
! In some countries or states the viewing of | |||||
JURY OR DAMAGE. | |||||
images on a display inside a vehicle even by | |||||
|
|
|
| ||
persons other than the driver may be illegal. |
|
|
|
| |
Where such regulations apply, they must be | WARNING |
|
|
| |
obeyed and this unit’s DVD features should | ! Use speakers over 50 W (output value) and be- | ||||
not be used. | tween 4 W to 8 W (impedance value). Do not | ||||
| use 1 W to 3 W speakers for this unit. | ||||
CAUTION | ! The black cable is ground. When installing | ||||
! PIONEER does not recommend that you in- | this unit or power amp (sold separately), make | ||||
sure to connect the ground wire first. Make | |||||
stall or service your display unit yourself. In- | |||||
sure that the ground cable is properly con- | |||||
stalling or servicing the product may expose | |||||
nected to metal parts of the car body using a | |||||
you to risk of electric shock or other hazards. | |||||
spade terminal sold commercially. The ground | |||||
Refer all installation and servicing of your dis- | |||||
wire of the power amp and the one of this unit | |||||
play unit to authorized Pioneer service person- | |||||
or any other device must be connected to the | |||||
nel. | |||||
car separately with different screws. If the | |||||
! Secure all wiring with cable clamps or electri- | |||||
screw for the ground wire loosens or falls out, | |||||
cal tape. Do not allow any bare wiring to re- | |||||
it could result in fire, generation of smoke or | |||||
main exposed. | |||||
malfunction. |
|
|
| ||
! Do not drill a hole into the engine compart- |
|
|
| ||
|
|
|
| ||
ment to connect the yellow cable of the dis- | Ground wire | POWER AMP | |||
play unit to the vehicle battery. Engine |
|
|
|
| |
vibration may eventually cause the insulation |
|
|
|
| |
to fail at the point where the wire passes from |
|
|
|
| |
|
|
|
| ||
the passenger compartment into the engine |
|
|
|
| |
compartment. Take extra care in securing the |
|
|
|
| |
wire at this point. |
|
|
|
| |
! It is extremely dangerous to allow the micro- | Other devices | Metal parts of car’s body |
phone lead to become wound around the | (Another electronic | |
device in the car) | ||
steering column or shift lever. Be sure to in- | ||
| ||
stall the unit in such a way that it will not ob- |
| |
struct driving. |
|
!Make sure that cables will not interfere with moving parts of the vehicle, such as the shift lever, parking brake or seat sliding mechan- ism.
!Do not shorten any cables. If you do, the pro- tection circuit may fail to work properly.
Section
17
Installation
En 77