Section

15Menu operations

Display

Equalizer curve

 

 

Custom2

Custom 2

 

 

Super Bass

Super bass

 

 

!The equalizer curves for Custom1 and Custom2 can be adjusted.

!You cannot select Custom1 and Custom2 when using the auto-equalizer.

!When Flat, no changes are made to the sound. You can check the effects of the equalizer curves by switching alternatively between Flat and another equalizer curve.

1Display the audio function menu. Refer to Introduction of menu operations on the previous page.

2Touch Graphic EQ on the audio function menu.

# You can select Graphic EQ when Auto EQ function is off.

3Touch cor dto select the desired item. Powerful—Natural—Vocal—Flat—Custom1

—Custom2—Super Bass

Adjusting the 8-band graphic equalizer

You can adjust the level of each band for the equalizer curves.

!A separate Custom1 curve can be created for each source. If you make adjustments when a curve other than Custom2 is se- lected, the equalizer curve settings will be stored in Custom1.

!A Custom2 curve that is common for all sources can be created. If you make adjust- ments when the Custom2 curve is se- lected, the Custom2 curve will be updated.

1Display the audio function menu. Refer to Introduction of menu operations on the previous page.

2Touch Graphic EQ on the audio function menu.

3Touch cor dto select the desired item. Powerful—Natural—Vocal—Flat—Custom1

—Custom2—Super Bass

4Touch the Equalizer band to adjust.

5Touch aor bto adjust the level of the equalizer band.

Range: +12dB to –12dB

# You can then select another band and adjust the level.

Using the auto-equalizer

The auto-equalizer is an equalizer curve created by auto EQ (refer to Auto EQ (auto-equaliz- ing) on page 68).

You can turn the auto-equalizer on or off.

If you connect an optional microphone to this unit, you can use this function.

1Display the audio function menu. Refer to Introduction of menu operations on the previous page.

2Touch Auto EQ to turn the auto-equali- zer on or off.

# You cannot use this function if auto EQ has not been carried out.

Using sonic center control

Sound that is suited for the listening position can easily be created with this function.

1Display the audio function menu. Refer to Introduction of menu operations on the previous page.

2Touch Sonic Center Control on the audio function menu.

3Touch cor dto select a listening posi- tion.

Range: Left 7 to Right 7

58 En