Pioneer AVH-P5100DVD Operating this unit Initial Settings, Adjusting initial settings

Section
03		Operating this unit
	Initial Settings		Switching the auxiliary 1 setting
	Adjusting initial settings		% Touch AUX1 on the initial menu to se-
			lect desired setting.
	Using the initial settings, you can customize
			! VIDEO – an iPod with video capabilities
	various system settings to achieve optimal per-
			connected with 4-pole mini plug cable (e.g.,
	formance from this unit.
			CD-V150M)
			! AUDIO – auxiliary device connected with a
			stereo mini plug cable
			! OFF – No auxiliary device is connected
			Switching the auxiliary 2 setting
			% Touch AUX2 on the initial menu to turn
			auxiliary 2 setting on.
			# To turn auxiliary 2 setting off, touch AUX2
1		Function display	again.

Shows the function names.

1Touch the source icon and then touch OFF to turn this unit off.

2Touch the screen to display the touch panel keys.

3Touch AV MENU and then touch INITIAL MENU to display the function names.

The function names are displayed and oper-

able ones are highlighted.

# To go to the next group of function names,

touch NEXT.

# To return to the previous group of function names, touch PREV.

4Touch ESC to return to the ordinary dis-

play.

# To return to the previous display, touch BACK.

Setting the rear output and subwoofer controller

This unit’s rear output (rear speaker leads out- put and RCA rear output) can be used for full- range speaker (FULL) or subwoofer (S.W) con- nection. If you switch the rear output setting to S.W, you can connect a rear speaker lead directly to a subwoofer without using an auxili- ary amp.

Initially, the unit is set for rear full-range speak- er connection (FULL). When rear output is connected to full range speakers (when FULL is selected), you can connect other full range speakers (REAR) or a subwoofer (S.W) to the RCA rear output.

!When the multi-channel processor (DEQ- P8000) is connected to this unit, you can- not operate this function.

1 Touch REAR SP on the initial menu.

Switching the auxiliary setting

Auxiliary devices connected to this unit can be activated individually. Set each AUX source to ON when using. For more information about connecting or using auxiliary devices, refer to Using the AUX source on page 49.

2 Touch c or d next to REAR SP to switch the rear output setting.

Touch c to select full-range speaker and FULL appears in the display. Touch d to select sub- woofer and S.W appears in the display.

#When no subwoofer is connected to the rear output, select FULL (full-range speaker).

42 En