1 TouchLIST to display the preset list.
#Whenthe touch panel keys are not displayed,
youcan display them by touching the screen.
2 Whenyou find a station that you want
tostore in memory, keep touching one of
presettuning keys P01 to P12 until the
beepsounds.
Thenext time you touch the same preset tun-
ingkey the station is recalled from memory.
#Toswitch between P01 to P06 and P07 to P12,
touchPREV or NEXT.
3 TouchESC to return to the ordinary dis-
play.
Note
Youcan also use aand bto recall stations as-
signedto preset tuning keys P01 to P12.

Storing the strongestbroadcast

stations sequentially

1 TouchAV MENU and then touch
FUNCTIONMENU to display the function
names.
2 TouchBSSM on the function menu to
turnBSSM on.
BSSMbegins to flash. While BSSM is flashing
the12 strongest broadcast stations will be
storedin order from the lowest channel up.
Whenfinished, BSSM stops flashing.
#Tocancel the storage process, touch BSSM
again.
3 TouchESC to return to the TV picture.
#Toreturn to the previous display, touch BACK.
Note
Storingbroadcast stations with BSSM may re-
placebroadcast stations you have saved using
P01to P12.
Digital Signal Processor

Introduction of DSP adjustments

Youcan use this unit to control multi-channel
processor(DEQ-P8000), which is sold sepa-
rately.
!Somefunctions may differ depending on the
multi-channelprocessor connected to this
unit.
Important
Whena multi-channel processor and an optional
DVDplayer are connected to this unit, be sure to
usean optical cable (e.g. CD-AD600).
1DSPdisplay
Showsthe DSP function names.
Bycarrying out the follo wing settings/adjust-
mentsin the order shown, you can create a fi-
nely-tunedsound field effortlessly.
1Settingthe speaker setting
2Usingthe position selector
3AutoTA and EQ (auto-time alignment and auto-
equalizing)
4Adjustingthe time alignment
5Adjustingthe speaker output levels using a
testtone
6Selectinga cross-over frequency
7Adjustingthe speaker output levels
8Adjusting3-band parametric equalizer
1 TouchAV MENU and then touch
DSPMENU to display the DSP function
names.
TheDSP function names are displayed and
operableones are highlighted.
Available accessories
En
74
Section
04