4 Selectthe position for the seat on
whichthe microphone is placed.
Referto Using the position selector on page
75.
#Ifno position is selected before you start auto
TAand EQ, FRONT-L is selected automatically.
5 PressSRC and hold until the unit turns
off.
6 Pressand hold EQ to enter the auto TA
andEQ measurement mode.
7 Plugthe microphone into the micro-
phoneinput jack on the multi-channel pro-
cessor.
Fordetails concerning operation, refer to the
multi-channelprocessor ’s operation manual.
8 TouchSTART to start the auto TAand
EQ.
9 Getout of the car and close the door
within10 seconds when the 10-second
count-downstarts.
Themeasurement tone (noise) is outputted
fromthe speakers, and auto TA and EQ be-
gins.
#Whenall speakers are connected, auto TA
andEQ is completed in about nine minutes.
#Tostop auto TA and EQ, touch STOP.
#Tocancel auto TA and EQ on the way,touch
BACKor ESC.
10 Whenauto TA and EQ is completed,
Completeis displayed.
Whencorrect measurement of car interior
acousticcharacteristics is not possible, an
errormessage is displayed. (Refer to Under-
standingauto TA and EQ error messages on
page89.)
11 TouchESC to cancel the auto TA and EQ
mode.
12 Storethe microphone carefully in the
glovecompartment.
Storethe microphone carefully in the glove
compartmentor any other safe place. If the
microphoneis subjected to direct sunlight for
anextended period, high temperatures may
causedistortion, color change or mal-
function.
Available accessories
En
84
Section
04