Section

04Basic operations

2 Eject a disc.

Ejecting a disc.

!Avoid subjecting the front panel to excessive shock.

!Keep the front panel out of direct sunlight and high temperatures.

!If removed, replace the front panel on the unit before starting up your vehicle.

Ejecting an SD

1Press h(eject) to display the ejecting menu.

2Eject an SD.

Ejecting an SD.

3 Press an SD to eject.

1Press h(eject) to release the front panel.

2Touch the detach key.

The front panel automatically slides toward you.

3Slide the dial at the bottom of the front panel to the right, and lift up the front panel while pushing down on the dial.

Removing the front panel

CAUTION

!Do not attempt to detach the front panel while DISC/SD is in the eject position.

!Do not attempt to detach the front panel while data is being written to USB/SD.

Doing so may cause the data to become cor- rupted.

!After the front panel has been detached, the attaching plate will move back to its original position automatically.

Be careful not to let hands or other objects get caught behind the monitor as it is moving back.

!Please make sure that the front panel is in its original position while the vehicle is in mo- tion.

It is dangerous to drive with the front panel sticking out.

!Do not place beverages or other objects on top of the front panel while it is fully open.

Important

!Handle gently when removing or attaching the front panel.

4Put the front panel into the provided protective case for safe keeping.

Attaching the front panel

1Slide the front panel into the top of the unit and push it into place.

Slide the inserter on the front panel into the in- sertion slot on top of the unit and push it into place.

18 En