Installation
1Installing the microphone
2 | CAUTION |
| It is extremely dangerous to allow the micro- |
| phone lead to become wound around the steer- |
| ing column or shift lever. Be sure to install the |
| unit in such a way that it will not obstruct driving. |
| Note |
| Install the microphone in a position and orienta- |
3 | tion that will enable it to pick up the voice of the |
person operating the system. | |
4 |
|
Section
17
Installation
5
1If the pawl gets in the way, bend it down.
2Factory radio mounting bracket
3Use either truss (5 mm × 8 mm) or flush surface (5 mm × 9 mm) screws, depending on the bracket screw holes.
4Frame
In some types of vehicles, discrepancy may occur between the unit and the dashboard. If this happens, use the supplied frame to fill the gap.
5Dashboard or console
When installing the microphone on the sun visor
1Install the microphone on the micro- phone clip.
1
2 
1Microphone
2Microphone clip
2Install the microphone clip on the sun visor.
With the sun visor up, install the microphone clip. (Lowering the sun visor reduces the voice recognition rate.)
En 
89