Section

15Menu operations

2 If you are adjusting the

Picture Adjustment, select the unit.

 

 

 

Completing Picture Adjustment

 

 

 

NAVI

 

for the Navigation system when

 

 

the RGB input setting is set to

 

 

 

NAVI.

 

Apps

 

Completing Picture Adjustment

 

 

for the Advanced App Mode

 

 

 

 

 

 

when the RGB input setting is

 

 

 

set to iPhone.

 

 

 

 

 

 

 

 

 

Adjusting the Picture Adjust-

 

 

 

 

 

 

ment for the rear view camera.

 

 

 

 

 

 

 

 

Auto EQ (auto-equalizing)

The auto-equalizer automatically measures the car’s interior acoustic characteristics, and then creates an auto-equalizer curve based on that information.

!To perform this function, dedicated micro- phone (e.g. CD-MC20) is required.

WARNING

As a loud tone (noise) may be emitted from the speakers when measuring the car's interior acoustic characteristics, never perform auto TA or auto EQ while driving.

 

Source

Adjusting the Picture Adjust-

 

ment for the source.

 

 

 

 

 

 

3Touch any of the following touch panel keys to select the function to be adjusted. Picture Adjustment items are displayed.

!Brightness – Adjusts the black intensity

!Contrast – Adjusts the contrast

!Color – Adjusts the color saturation

!Hue – Adjusts the tone of color (red or green is emphasized)

!Dimmer – Adjusts the brightness of the dis- play

!Temperature – Adjusts the color tempera- ture, resulting in a better white balance

#You can adjust Hue only when the color sys- tem is set to NTSC.

#With some rear view cameras, picture adjust- ment may not be possible.

4Touch cor dto adjust the selected item.

Each time you touch cor d, the level of the selected item increases or decreases.

# Dimmer can be adjusted from +1 to +48.

# Temperature can be adjusted from +3 to –3.

Notes

!You cannot operate this function while driving.

!Different Brightness/Contrast/Dimmer set- tings can be set for when the illumination switch is on and when it is off.

CAUTION

!Thoroughly check the conditions before per- forming auto EQ as the speakers may be da- maged if these functions are performed when:

—The speakers are incorrectly connected. (For example, when a rear speaker is con- nected as a subwoofer output.)

—A speaker is connected to a power amp de- livering output higher than the speaker’s maximum input power capability.

!If the microphone is placed in an unsuitable position the measurement tone may become loud and measurement may take a long time, resulting in battery drainage. Be sure to place the microphone in the specified location.

Before operating the auto EQ function

!Carry out auto EQ in as quiet a place as possible, with the car engine and air condi- tioning switched off. Also cut power to car phones or portable telephones in the car, or remove them from the car before carrying out auto EQ. Sounds other than the mea- surement tone (surrounding sounds, en- gine sound, telephones ringing etc.) may prevent correct measurement of the car in- terior acoustic characteristics.

!Be sure to carry out auto EQ using the op- tional microphone. Using another micro- phone may prevent measurement, or result in incorrect measurement of the car inter- ior acoustic characteristics.

!In order to perform auto EQ, the front speaker must be connected.

68 En