Other functions

Setting rear monitor output

1 Turn the unit off.

The output source for the rear monitor can be

Refer to Basic operations on page 14.

 

switched to the following:

2 Press and hold HOME to start Touch

! Mirror – The source on the front screen of

Panel Calibration.

this unit

The 4-point touch panel adjustment screen ap-

Disc – The video and sound from the disc

pears. When 2-point appears at once, touch

USB/iPod 1 – The video and sound from

both.

the USB storage device

3 Touch each of the arrows on the four

SD – The video and sound from the SD

corners of the screen.

card

# To cancel the adjustment, press and hold

AV – The video and sound from AV input

HOME.

Off– No source

 

Notes

4 Press HOME to complete 4-point adjust-

ment.

! You cannot play DivX files on the rear and

Data for the adjusted position is saved.

front monitors at the same time.

# Do not turn off the engine while the data is

! The port that supports the rear monitor will

being saved.

only be USB input 1.

 

! USB/iPod 1 and SD are compatible DivX/

5 Press HOME to proceed to 16-point ad-

MPEG-4/WMV/H.264 only.

justment.

! You cannot use this function while using MIX-

The 16-point touch panel adjustment screen

TRAX. If you use MIXTRAX while this function

appears.

is in use, this function will turn off.

# To cancel the adjustment, press and hold

 

HOME.

Section

16

functions Other

Adjusting the response positions of the touch panels (Touch Panel Calibration)

If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel. There are two adjustment methods: 4-point adjustment, in which you touch four corners of the screen; and 16-point adjustment, in which you make fine-adjustments on the entire screen.

!Park your car in a safe place and use this function. Do not operate it while driving.

!Touch the screen gently for adjustment. Forcefully pressing the touch panel may da- mage the touch panel. Do not use a sharp pointed tool such as a ballpoint pen or me- chanical pen. Doing so may damage the screen.

!If the touch panel cannot be adjusted prop- erly, consult your local Pioneer dealer.

6Gently touch the center of the + mark displayed on the screen.

After you touch all the marks, the data for the adjusted position is saved.

# Do not turn off the engine while the data is being saved.

7Press and hold HOME to complete the adjustment.

Using an AUX source

A separately sold auxiliary device such as a VCR or portable device can be connected to this unit. When connected, the auxiliary device is automatically recognized as an AUX source and is assigned to AUX.

About AUX connection methods

You can connect auxiliary devices to this unit.

En 75