Section

15 Menu operations

System settings

2 Touch App sound mixing on the System

Switching the auxiliary setting

menu to select desired setting.

OFF (off)—Low (low)—Mid (mid)—High

Activate this setting when using an auxiliary

(high)

 

device connected to this unit.

 

1 Display the system menu.

Refer to Introduction of menu operations on page 56.

2Touch AUX Input on the system menu to turn AUX Input on or off.

Setting AV input

Activate this setting when using an external video component connected to this unit.

1 Display the system menu.

Refer to Introduction of menu operations on page 56.

2Touch AV Input on the system menu to turn AV Input on or off.

Setting the RGB Input

You can switch the setting of RGB input.

1 Display the system menu.

Refer to Introduction of menu operations on page 56.

2Touch RGB Input on the system menu to turn iPhone or NAVI.

Note

If you use Advanced App Mode, set to iPhone.

Setting the App sound mixing

You cannot turn on or off Mixing when this unit is playing a song of iPod.

The sound of application during Advanced App Mode can be adjusted.

Enable this setting when you want to mix the App sound with the sound from a built-in source (such as the radio). The volume of the App sound can be selected from 3 levels.

1 Display the system menu.

Refer to Introduction of menu operations on page 56.

Setting the rear output and subwoofer controller

This unit’s rear output (rear speaker leads output and RCA rear output) can be used for full- range speaker (Full) or subwoofer (Subwoofer) connection. If you switch the rear output setting to Subwoofer, you can connect a rear speaker lead directly to a sub- woofer without using an auxiliary amp. Initially, the unit is set for a rear full-range speaker connection (Full).

1 Turn the unit off.

Refer to Basic operations on page 14.

2Press HOME to switch to the HOME dis- play.

3Touch System key.

System menu is displayed.

4Touch Rear Speaker on the system menu to switch the subwoofer output or full-range speaker.

# When no subwoofer is connected to the rear output, select Full (full-range speaker).

# When a subwoofer is connected to the rear output, select Subwoofer (subwoofer).

Notes

!Even if you change this setting, there will be no output unless you turn the subwoofer out- put on (refer to Using subwoofer output on page 58).

!Both rear speaker lead outputs and RCA rear output are switched simultaneously in this setting.

Setting the Tag forwarding

The song information (tag) can be saved from the broadcasting station of HD Radio to your iPod.

64 En