Section

Before you start

02

Operating environment

Visit our website

This unit should be used within the temperature ranges shown below.

Operating temperature range: 14 °F to 140 °F

EN300328 ETC test temperature: –4 °F and 131 °F

After-sales service for Pioneer products

Please contact the dealer or distributor from where you purchased this unit for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below:

Please do not ship your unit to the companies at the addresses listed below for repair without advance contact.

U.S.A.

Pioneer Electronics (USA) Inc.

CUSTOMER SUPPORT DIVISION P.O. Box 1760

Long Beach, CA 90801-1760 800-421-1404

CANADA

Pioneer Electronics of Canada, Inc.

CUSTOMER SATISFACTION DEPARTMENT 340 Ferrier Street

Unit 2

Markham, Ontario L3R 2Z5, Canada 1-877-283-5901 905-479-4411

For warranty information please see the Limited Warranty sheet included with this unit.

Visit us at the following site:

http://www.pioneerelectronics.com

Before

 

in Canada

 

http://www.pioneerelectronics.ca

 

1

Register your product. We will keep the details

you

 

of your purchase on file to help you refer to

 

 

 

this information in the event of an insurance

start

 

claim such as loss or theft.

 

 

2

Receive updates on the latest products and

 

 

technologies.

 

3

Download owner’s manuals, order product

 

 

catalogues, research new products, and

 

 

much more.

 

4

Your feedback is important in our continual ef-

 

 

fort to design and build the most advanced,

 

consumer-focused product in the industry. Serial number

Adjusting the response positions of the touch panels (Touch Panel Calibration)

If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel. Refer to Adjusting the response positions of the touch panels (Touch Panel Calibration) on page 75.

Use and care of the remote control

Installing the battery

Slide the tray on the back of the remote control out and insert the battery with the plus (+) and minus (–) poles aligned properly.

!When using for the first time, pull out the film protruding from the tray.

En 9