Section

Menu operations

Audio adjustments

Display

Equalizer curve

Using fader/balance adjustment

Flat

Flat

You can change the fader/balance setting to

Custom1

Custom 1

provide an ideal listening environment for all

Custom2

Custom 2

of the occupied seats.

 

 

S.Bass

Super bass

 

1 Display the audio function menu.

 

 

! The equalizer curves for Custom1 and

Refer to Introduction of menu operations on

Custom2 can be adjusted.

the previous page.

! You cannot select Custom1 and Custom2

 

2 Touch Fader/Balance on the audio func-

when using the auto-equalizer.

tion menu.

! When Flat, no changes are made to the

3 Touch aor bto adjust the front/rear

sound. You can check the effects of the

equalizer curves by switching alternatively

speaker balance.

between Flat and another equalizer curve.

Range: Front 15 to Rear 15

 

 

15

operations Menu

#Select F/R 0 L/R 0 when only using two speakers.

#The front/rear speaker balance cannot be ad- justed when the rear output setting is Subwoofer. Refer to Setting the rear output and subwoofer controller on page 64.

1Display the audio function menu. Refer to Introduction of menu operations on the previous page.

2Touch Graphic EQ on the audio function menu.

# You cannot select or adjust the equalizer

4Touch cor dto adjust the left/right speaker balance.

Range: Left 15 to Right 15

Note

You can also set the fader/balance by dragging the dot on the displayed table.

curves of Custom1 and Custom2 when using the auto-equalizer.

3 Touch the desired setting.

S.Bass—Powerful—Natural—Vocal—Flat— Custom1—Custom2

Using the equalizer

You can adjust the equalization to match the car’s interior acoustic characteristics as de- sired.

Recalling equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves.

Display

Equalizer curve

 

 

 

 

Powerful Powerful

NaturalNatural

VocalVocal

Adjusting the 8-band graphic equalizer

You can adjust the level of each band for the equalizer curves.

!A separate Custom1 curve can be created for each source. If you make adjustments when a curve other than Custom2 is se- lected, the equalizer curve settings will be stored in Custom1.

!A Custom2 curve that is common for all sources can be created. If you make adjust- ments when the Custom2 curve is se- lected, the Custom2 curve will be updated.

1Display the audio function menu. Refer to Introduction of menu operations on the previous page.

En 57