Section
15Menu operations
Using a Bluetooth device to pair
If you cannot open the connection between your Bluetooth device and this unit from your Bluetooth device, you can use this function to establish a connection.
1Display the Bluetooth Connection Menu.
Refer to Introduction of Bluetooth telephone op- erations on page 38.
2Touch Special Device to select the spe- cial device.
# Bluetooth devices that are difficult to establish a connection with are called special devices. If your Bluetooth device is listed as a special device, select the appropriate one.
3Touch the special device list to open the connection.
This unit is now on standby for a connection with the Bluetooth device.
# If three devices are already paired,
Memory Full is displayed and pairing cannot be performed. In such cases, delete a paired device first. Refer to the previous page.
4Use your Bluetooth device to establish a connection.
The connection method is different depending on the Bluetooth device. Refer to the manual for your Bluetooth device to establish a con- nection.
While connecting, Pair your phone is dis- played. If the connection is established, Paired is displayed.
# If the connection fails, Error is displayed. In such cases, try again from the beginning.
# You may also need to enter a PIN code into this unit. If your telephone requires a PIN code to establish a connection, look for the code on the telephone or in its accompanying documenta- tion.
# The PIN code is set to 0000 as the default, but can be changed. Refer to Entering PIN code for Bluetooth wireless connection on the next page.
Connecting to a Bluetooth device automatically
If this function is set to on, a connection between your Bluetooth device and this unit will take place automatically as soon as the two devices are less than a few meters apart. Initially, this function is set to on.
1Display the Bluetooth Connection Menu.
Refer to Introduction of Bluetooth telephone op- erations on page 38.
2Touch Auto Connect to turn automatic connection on.
If your Bluetooth device is ready for a Bluetooth wireless connection, a connection to this unit will automatically be established.
# To turn automatic connection off, touch Auto Connect again.
If connection fails, “Auto connection failed. Retry?” appears. Touch Yes to reconnect.
3Once you turn your vehicle’s ACC switch on again, a connection is estab- lished automatically.
Switching visible unit
This function sets whether or not to make this unit visible to the other device.
Initially, this function is set to on.
1Display the Bluetooth Connection Menu.
Refer to Introduction of Bluetooth telephone op- erations on page 38.
2Touch Visibility to select visibility off.
#To turn visibility on, touch Visibility again.
Displaying Bluetooth Device address
This unit displays its Bluetooth device ad- dress.
1Display the Bluetooth Connection Menu.
Refer to Introduction of Bluetooth telephone op- erations on page 38.
72 En