Section
02Operating this unit
| Section |
Operating this unit | 02 |
TunerNote
Playing songs on a USB storage device
2 Use M.C. to select the desired file name |
Basic Operations
Selecting a band
1Press B (BAND/ESC) until the desired band (F1,
F2, F3 for FM or AM1) is displayed.
1Press B (BAND/ESC) until the desired band (F1/
F2/ F3 for FM, MW or S1/S2 for Short Wave) is displayed.
!You cannot receive S1/S2 band depending on the area.
Manual tuning (step by step)
1Press c or d.
Seeking
1Press and hold c or d, and then release.
You can cancel seek tuning by briefly pressing c or d.
While pressing and holding c or d, you can skip stations. Seek tuning starts as soon as you re- lease c or d.
Storing and recalling stations for each band
Using preset tuning buttons
1When you find a station that you want to store in memory, press one of the preset tuning buttons (1 to 6) and hold until the preset number stops flashing.
Depending on the area, you cannot switch the display.
Function settings
1Press M.C. to display the main menu.
2Turn M.C. to change the menu option and press to select FUNCTION.
3Turn M.C. to select the function.
After selecting, perform the following procedures to set the function.
BSM (best stations memory)
BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength.
1Press M.C. to turn BSM on. To cancel, press M.C. again.
LOCAL (local seek tuning)
Local seek tuning lets you tune in to only those radio stations with sufficiently strong signals for good re- ception.
1Press M.C. to display the setting mode.
2Turn M.C. to select the desired setting.
FM:
AM/MW/SW:
The highest level setting allows reception of only the strongest stations, while lower levels allow the reception of weaker stations.
3Press M.C. to confirm the selection.
1Open the USB connector cover and plug in the USB storage device using a USB cable.
Stopping playback of files on a USB storage device
1You may disconnect the USB storage device at anytime.
Selecting a folder
1Press a or b.
Selecting a track
1Press c or d.
Fast forwarding or reversing
1Press and hold c or d.
!When playing compressed audio, there is no sound during fast forward or reverse.
Returning to root folder
1Press and hold B (BAND/ESC).
Switching between compressed audio and
1Press B (BAND/ESC).
Note
Disconnect USB storage devices from the unit when not in use.
Displaying text information
Selecting the desired text information
1Press .
Scrolling the text information to the left
1Press and hold .
Notes
(or folder name). |
Changing the file or folder name
1Turn M.C.
Playing
1When a file or track is selected, press M.C.
Viewing a list of the files (or folders) in the selected folder
1When a folder is selected, press M.C.
Playing a song in the selected folder
1When a folder is selected, press and hold M.C.
Advanced operations using special buttons
Selecting a repeat play range
1Press 6/ to cycle between the following:
!DISC – Repeat all tracks
!TRACK – Repeat the current track
!FOLDER – Repeat the current folder USB audio player/USB memory
!ALL – Repeat all files
!TRACK – Repeat the current file
!FOLDER – Repeat the current folder
Playing tracks in random order
1Press 5/ to turn random play on or off. Tracks in a selected repeat range are played in
random order.
Pausing playback
1Press 2/PAUSE to pause or resume.
English
2Press one of the preset tuning buttons
(1 to 6) to select the desired station.
# You can also recall stored radio stations by pressing a or b during the frequency display.
Switching the display
CD/CD-R/CD-RW and USB storage devices
! Depending on the version of iTunes used to |
write MP3 files to a disc or media file types, in- |
compatible text stored within an audio file |
may be displayed incorrectly. |
! Text information items that can be changed |
depend on the media. |
Enhancing compressed audio and restoring rich sound (sound retriever)
1Press 1/S.Rtrv to cycle between: OFF
1 is effective for low compression rates, and 2 is effective for high compression rates.
Selecting the desired text information
%Press .
Program service
#The frequency appear on the display for eight seconds.
Basic Operations
Playing a
1Insert the disc into the disc loading slot with the label side up.
Ejecting a
1Press h.
Selecting and playing files/ tracks from the name list
1Press to switch to the file/track name list mode.
Function settings
1Press M.C. to display the main menu.
2Turn M.C. to change the menu option and press to select FUNCTION.
6 En
En 7